Type | drainage pump |
Maximum immersion depth | 5 m |
Impeller design type | free-flowing impeller |
Power consumption | 1100 W |
Nominal current IN | 5 A |
Enable Type | direct online (DOL) |
Insulation class | F |
Cable type | H07RN-F |
Connection to the pipeline from the pressure side | G 1½ |
Type | drainage pump |
Application | for dirty water /(з невеликою кількістю піску та гравію) |
Maximum immersion depth | 5 m |
Impeller design type | free-flowing impeller |
Operating pressure | 3 bar |
Free spherical passage of hydraulics | 20 mm |
Ambient temperature T | 5 °C |
Motor type | electric /занурювальний двигун – з поверхневим охолодженням |
Mains connection | 1~230 V, 50 Hz |
Voltage tolerance | ±10 % |
Rated motor power P2 | 0.75 kW |
Power consumption | 1100 W |
Nominal current IN | 5 A |
Enable Type | direct online (DOL) |
Nominal number of revolutions n | 2900 1/min |
The maximum switching frequency t | 60 1/h |
Insulation class | F |
Degree of water protection | IP68 |
Operating mode (submerged) | S1 |
Operating mode (in a non-immersed state) | S3-25% |
Cord length | 10 m |
Cable type | H07RN-F |
Cable cross-section | 3G1 mm² |
Plug | CEE7/7 (safety contact) |
Type of connecting cable | not dismountable |
Functions | float switch |
Engine protection | bimetallic |
automatic reset |
Body material | PP |
Impeller | PA6-GF30 |
Shaft | stainless steel |
Sealing material on the pump side | NBR |
Sealing material | NBR |
Engine material | steel |
Connection to the pipeline from the pressure side | G 1½ |
Warranty | 12 months |
Width | 200 mm |
Height | 400 mm |
Length | 240 mm |
Weight | 6.90 kg |
Volume | 0.0192 m3 |
Sewage pump with open multi-channel impeller and vertical threaded connection. The pump housing, suction basket and impeller are made of composite material. 1~ motor (cooling jacket) with built-in operating capacitor and automatically controlled motor thermal control. The motor housing is made of stainless steel. Oil-filled seal chamber with a double seal: a radial shaft seal is installed on the engine side, a sliding face seal on the pump side. Connecting cable with float switch and mounted plug (CEE 7/7).